WPC Wall Panel Installation Tutorial:

　　1. Measure the height and width of the wall;

　　2. Cut paneling with a circular saw;

　　3. Fix the metal trim to the starting position with a nail gun;

　　4. Apply adhesive with a glue gun in a “W” or wave pattern;

　　5. Install the first wall panel;

       6. Connecting with the metal trim ;

　　7. Repeat the installation process with the next panel piece;

　　8. connect the wall panels with the metal trim;

　　9. Continue along the wall until you have completed;

　　10. Successive panels are installed in the same manner until a row;

　　11. Measure the remaining wall size.

　　12. Cut the 3D wall panel with a cutter knife.

Electric drill is a tool that must be used in the installation process; because the plastic wood material has a certain brittleness, when fixing the keel with the WPC material, the lead hole is first drilled, then Fix screws, but don’t directly nailed. Otherwise, the material may crack and break.Nail gun can be used to fix the wall cladding too.Labor gloves are best used during construction.It is recommended to use stainless steel screws to fix the screws during installation.